Polycom Webcam RMX 2000 Bedienungsanleitung PDF herunterladen (Seite 21)

Polycom RMX 2000 Hardware Guide

1-15

Replacing a Functional MPM Module

Use the following procedure to replace a faulty MPM Module types F

or H:

1 Ensure that power switch to the RMX is turned OFF (O).

2 Unscrew the screws on the front panel of the RMX that secure the

MPM Module.

3 Use the metal ejectors to pull the MPM Module out of its slot in the

Backplane.

4 Carefully slide the MPM Module out through the front panel.

5 Slide in the replacement MPM Module.

6 Push the MPM Module firmly into the Backplane, making sure it is

properly seated in its slot.

7 Ensure that the metal ejectors are fully retracted into their housings.

8 Tighten the screws on the front panel of the RMX that secure the

MPM Module.

9 Turn ON the RMX.

1 2 ... 16 17 18 19 20 21 22 23 24

Keine Kommentare

Polycom Webcam RMX 2000 Bedienungsanleitung Seite 21