Polycom Telephone RMX 2000 Bedienungsanleitung PDF herunterladen (Seite 23)

Polycom RMX 2000 Hardware Guide

1-17

Replacing a Functional MPM Module

The MPM module is Hot Swappable and the power on the RMX can stay

ON. For more information see - Use the following procedure to replace a

faulty MPM Module types F or H:

1 Unscrew the captive screws on the front panel of the RMX that secure

the MPM Module.

2 Use the metal ejector levers to pull the MPM Module out of its slot in

the Backplane.

3 Carefully slide the MPM Module out through the front panel.

4 Slide in the replacement MPM Module.

5 Push the MPM Module firmly into the Backplane, making sure it is

properly seated in its slot.

6 Ensure that the metal ejector levers are fully retracted into their

housings.

7 Tighten the captive screws on the front panel of the RMX that secure

the MPM Module.

8 Restart the RMX2000.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28

Keine Kommentare

Polycom Telephone RMX 2000 Bedienungsanleitung Seite 23