Polycom Wireless Server 6000 Technical Information PDF herunterladen (Seite 57)

6–1

Installing KIRK Repeater

This section provides information about the repeater and how to unpack and

install it. Installing repeaters requires a software installation as well as a

hardware installation.

Before you install the equipment, ensure that a site

planner

defines the location

of the repeaters.

This section includes information about:

• “KIRK Repeater Description” on page 6-1

• “Installing the KIRK Repeater” on page 6-4

• “Recording the Installation Information” on page 6-7

• “Checking Indicators” on page 6-7

• “Powering the KIRK Repeater” on page 6-7

• “Programming a KIRK Repeater with the KIRK Programming Kit” on

page 6-7

KIRK Repeater Description

This section contains information about:

• “KIRK Repeater provides RF Channels to KIRK Handsets” on page 6-1

• “KIRK Repeater - Appearance and Components” on page 6-3

• “KIRK Repeater LED Indicators” on page 6-4

KIRK Repeater provides RF Channels to KIRK Handsets

The KIRK Repeater is a building block to be used to extend the coverage area

in a KIRK solution. The repeater does not increase the number of traffic

channels, however it provides a larger physical spreading of the traffic

channels and thereby increases the coverage area established with the KIRK

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 197 198

Keine Kommentare

Polycom Wireless Server 6000 Technical Information Seite 57